01
Odor Gas Inflow
Gas captured at the source is stably transported to the adsorption tower.
ODOR CONTROL SYSTEM
A/C TOWER
Stably removing odor and gaseous pollutants using the adsorption power of activated carbon.ACTIVATED CARBON TOWER
Porous activated carbon captures odor-causing substances —
a high-efficiency adsorption system.
A/C TOWER uses the vast microporous surface of activated carbon to adsorb odor and gaseous pollutants. Its process is simple and applicable to a wide range of low- and medium-concentration odors, making it highly versatile in the field.
Treatment efficiency depends on the type and volume of activated carbon, gas residence time, and moisture and dust conditions. Changjo Eng analyzes the target substance and operating environment to design the adsorption bed and replacement cycle.
PROCESS FLOW
Treatment Process
Pre- and post-treatment stages are combined to fit each site's conditions.02
Dust Pre-treatment
Dust and moisture that would impair adsorption performance are managed to the required level.
03
Activated Carbon Adsorption
The activated carbon's micropores adsorb odor and gaseous pollutants.
04
Clean Gas Discharge
Treated gas that has passed through the adsorption bed is safely discharged.
ADSORPTION DESIGN
From activated carbon selection to replacement workflow
Even for the same tower, stable performance requires selecting activated carbon suited to the target gas and securing sufficient contact time. We design the structure to reduce pressure loss and adsorption-bed channeling, and to allow saturated activated carbon to be replaced safely.
- Tailored Activated Carbon SelectionAdsorbent applied to match odor components and concentration
- Even Gas DistributionInternal flow designed to use the entire adsorption bed
- Pressure Loss ManagementConfiguration that accounts for blower load and operating efficiency
- Replacement Cycle PlanningMaintenance that accounts for operating hours and saturation status
DESIGN POINT
Standards that keep adsorption performance stable over time
Tailored Adsorbent
Suitable adsorbents, such as standard or impregnated activated carbon, are selected to match the target.
Uniform Flow
Inlet and support layers are configured so gas doesn't concentrate in specific sections.
Replacement Management
Work access is secured to handle activated carbon loading/unloading and spent-adsorbent disposal.
FIELD APPLICATION