01
Odor Gas Capture
Gas is stably captured at the source and its flow rate is evened out.
ODOR CONTROL SYSTEM
Combustion Treatment System
Treating high-concentration odor and organic gases through a stable combustion reaction.COMBUSTION TREATMENT
Oxidizing odor gas with thermal energy
for stable decomposition.
A combustion treatment system treats gas containing odor and VOCs by oxidizing it in a reaction chamber. We analyze the inflow gas's concentration, composition, temperature, and flow rate to set the required reaction conditions.
Changjo Eng designs a combustion system tailored to each site, considering not only treatment performance but also fuel consumption, equipment safety, and the startup and shutdown process.
PROCESS FLOW
Treatment Process
Pre- and post-treatment stages are combined to fit each site's conditions.02
Safety Pre-treatment
Moisture and dust are managed and safety conditions are checked before operation.
03
Combustion Oxidation
Odor and organic gases are oxidized at the set temperature and residence time.
04
Discharge & Heat Management
Treated gas is discharged and heat is efficiently managed based on operating conditions.
SYSTEM ENGINEERING
Temperature, time, and mixing are designed together.
Stable combustion treatment requires not only sufficient reaction temperature but also even gas mixing and adequate residence time in the reaction chamber. Automatic control that reflects field load fluctuations secures both treatment performance and operating stability.
- Reaction Condition OptimizationTemperature and residence time set to match gas composition
- Load Fluctuation ResponseControl that responds to changes in inflow concentration and airflow
- Safety InterlocksStaged protection against abnormal temperature and pressure
- Maintenance AccessEquipment layout that accounts for inspection and consumable replacement
DESIGN POINT
Design that accounts for real-world operation
Temperature Control
Reaction temperature is kept stable to prevent overheating and incomplete reaction.
Operating Stability
A control system is configured to monitor pressure, flow rate, and combustion status.
Maintenance Convenience
Accessibility and work space are secured for easy inspection and replacement of key components.
FIELD APPLICATION